Florabest FAHE 18 A1 Manuel d'utilisateur télécharger pdf (Page 15)

15

GB

Assembling instructions

• Alwayas wear cut-protection gloves

• Undertake only work with which you

are condent.

• In case of uncertainty, contact a spe-

cialist or contact our service directly.

Prior to commissioning the device, you

must:

- attaching and setting the shoulder

strap

- tting the saw chain and blade

- tensioning the saw chain

- ll up with chain oil

- charge and insert the battery (see

“Charging process”)

Attaching/setting the

shoulder Strap

1. Attach the carabiner hook of the

shoulder belt (15) to the carrying

eye (16) on the telescopic arm of

the device.

2. Set the belt length in a way that

the carrying eye (16) is at hip

height (see small image).

3. You can also adjust the height of

the carrying eye (16) on the tel-

escopic arm after loosening the

hex socket head screw (16a).

Fitting the saw chain and

blade

Turn off the appliance and, before

doing any servicing, remove the

battery.

1. Loosen the blade xing screws

(5) and remove the chain wheel

cover (6) (see small image).

2. Spread out the sawing chain (1)

in a loop in a way that the an-

gled cutting edges of the chain

links are aligned clockwise.

3. Place the sawing chain (1) into

the blade groove.

4. To install, hold the blade (2)

tilted at an angle of approx.

45degrees upward, and guide

the sawing chain (1) around the

chain wheel (24).

5. Place the blade (2) so that the

drill hole (25) in the blade (2) ts

the chain dowel pin (26).

6. To facilitate the assembly, posi-

tion the chain clamping pin (26)

by turning the chain spanners

(3).

7. Assemble the chain wheel cover

(6) with the blade attachment

screws (5).

8. Tighten the blade attachment

screws (5) with light hand force

only because the sawing chain

(1) must still be tightened.

Ensure that chain tensioning pin

(26) is positioned in hole (25) on

the blade (2). The pin must be com-

pletely inserted into the hole.

Tensioning the saw chain

Turn off the appliance and, before

doing any servicing, remove the

battery.

The tension of saw chain (1) is important

both for your safety and for the function of

the cordless pruner. A correctly tensioned

saw chain will increase the lifetime of your

equipment.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 107 108

Commentaires sur ces manuels

Pas de commentaire