Florabest FAHE 18 A1 Manuel d'utilisateur Page 7

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 108
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 6
7
GB
Technical Data
Cordless pruner ......................FAHE 18 A1
Motor voltage ..................18 V
1.5 Ah
Max. spindle rotation speed .....2500 min
-1
Protection class ....................................III
Protection category ...........................IPX0
Chain speed v
0
..................... max. 5 m/s
Weight (incl. accessories) .. approx. 4.0 kg
Volume oiltank .............................70 cm
3
Chain bar ........8“ Oregon 080NDEA318
Chain ......................... Oregon 91P033X
Chain pitch ...................3/8“ (9,5 mm)
Number of chain drive links .............33
Chain width ............................1.3 mm
Teeth of the sprocket chain wheel ........6
Sawing length ..................approx. 20 cm
Acoustic pressure level
(L
pA
) ............. 85.7 dB(A); K
pA
=3.0 dB(A)
Sound power level (L
WA
)
measured .....95.8 dB(A); K
wA
=3.0 dB(A)
guaranteed ...........................99 dB(A)
Vibration at the handle
(a
h
) ............... < 2.5 m/s
2
; K = 1.5 m/s
2
Battery (Li-Ion) ........ LLR08-CA5-200-1.5Ah
Nominal voltage ......................... 18 V
Capacity ................................ 1500 mAh
Charging time .......................approx. 1 h
Recharger .....................JLH282101500G1
Nominal consumption ..................... 40 W
Voltage input .. 100-240 V~, 50 Hz/60 Hz
Voltage output ............. 21 V
1500 mA
Protection class ................................
II
Protection category ...........................IPX0
Noise and vibration values were deter-
mined according to the standards and
stipulations mentioned in the declaration of
conformity.
Technical and optical changes can be
carried out in the course of further devel-
opment without notice. All dimensions, ref-
erences and information of this instruction
manual are therefore without guarantee.
Legal claims, which are made on the basis
of the instruction manual, cannot thus be
considered as valid.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another. The stated
vibration emission value may also be used
for a preliminary exposure assessment.
Warning: The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.
Safety precautions aimed at pro-
tecting the user should be based on
estimated exposure under actual
usage conditions (all parts of the
operating cycle are to be consid-
ered, including, for example, times
during which the power tool is
turned off and times when the tool
is turned on but is running idle).
Vue de la page 6
1 2 3 4 5 6 7 8 9 10 11 12 ... 107 108

Commentaires sur ces manuels

Pas de commentaire