Florabest FBLB 33 A1 Manuel d'utilisateur télécharger pdf (Page 12)

- 12 -

7.4 Blower mode

Your leaf blower is designed for blow-cleaning

terraces, walkways, lawns, shrubs and many

hard-to-reach areas where dirt and debris can

collect.

For your own personal safety, please read again

all the safety information and directions for use in

these operating instructions before you operate

the equipment.

Do not use the equipment if other people or

animals are in the immediate vicinity. Keep a

minimum distance of 10m from other persons or

animals.

When working in a very dusty environment, wear

a dust mask or breathing mask.

For better control of the blowing direction, always

keep a suitable distance from the material you

want to blow away. Never blow in the direction of

persons in the immediate vicinity.

Before you use the equipment, use a rake or

broom to dislodge and remove foreign bodies

from the area you want to clean. This will help to

prevent injuries.

Control the air velocity by adjusting the throttle le-

ver between the idle and full throttle settings. Test

different throttle lever settings in order to ﬁ nd the

optimum air velocity for the particular task.

Important: Always wear safety goggles or a

face mask for protection against objects which are

whirled up or catapulted away.

Important: Always carry the equipment so that

the hot exhaust gases do not come into contact

with your clothes and damage them and so that

the fumes are not inhaled.

To operate the equipment:

Follow the instructions for starting the engine as

described in section 7.1 and 7.2.

Let the engine run in idle mode and put on the

equipment as shown in Fig. 5. Make sure that

nothing covers the exhaust pipe as it becomes hot.

Hold the handle tightly in your right hand (Fig. 6)

and swing the blower tube back and forth so that

the required area is cleared of dirt and debris.

Integrated in the handle (Fig. 4a/Item 1) are the

throttle lever (Fig. 4a/Item 2) and the On/Off

switch (Fig. 4a/Item 4).

The throttle lever catch (Fig. 4a/Item 3) can be

used to lock the engine in the full throttle setting

without having to keep pressing the throttle lever.

Important: Before you switch off the equipment,

reset the throttle lever catch to the standard throttle

setting.

8. Cleaning, maintenance,

storage, starting again

after storage, transport and

ordering of spare parts

Always switch off the equipment and pull out the

spark plug boot before carrying out any mainte-

nance work.

8.1 Cleaning

•

Keep all safety devices, air vents and the

motor housing free of dirt and dust as far as

possible. Wipe the equipment with a clean

cloth or blow it down with compressed air at

low pressure.

•

We recommend that you clean the equipment

immediately after you use it.

•

Clean the equipment regularly with a damp

cloth and some soft soap. Do not use cleaning

agents or solvents; these may be aggressive

to the plastic parts in the equipment. Ensure

that no water can get into the interior of the

equipment.

8.2 Maintenance

Servicing the air ﬁ lter (Fig. 7a-7b)

Soiled air ﬁ lters reduce the engine output by

supplying too little air to the carburetor. Regular

checks are therefore essential. The air ﬁ lter should

be checked after every 25 hours of use and clea-

ned if necessary. If the air contains a lot of dust,

the air ﬁ lter should be checked more frequently.

1. Remove the air ﬁ lter cover (Fig. 7a).

2. Remove the ﬁ lter element (Fig. 7b).

3. Clean the ﬁ lter element by tapping it or

blowing it.

4. Assemble in reverse order.

Important: Never clean the air ﬁ lter with petrol

or inﬂ ammable solvents.

Anleitung_3436063_LB4.indb 12Anleitung_3436063_LB4.indb 12 01.06.12 13:2601.06.12 13:26

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 61 62

Commentaires sur ces manuels

Pas de commentaire

Florabest FBLB 33 A1 Manuel d'utilisateur Page 12

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel de jardinage Florabest FBLB 33 A1